Table of Contents
Advertisement
22
User Settings
-PBP
1
To view the OSD menu, press the joystick button at
the bottom of the monitor and then enter the Menu.
2
Go to PBP by moving the joystick.
3
Configure the options following the instructions that
appear in the bottom right corner.
4
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > PBP
Sub
Selects the video signal input of the sub screen.
Sound Out
Sound Out have three options:HDMI1, HDMI2, DP.
Swap
Toggles between the main screen and sub screen in PBP mode.
Sub Full
Converts the sub screen of PBP mode to the wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main Wide
Original
Sub
Wide
Original
/ OK) it.
Description
Displays the video to fit the PBP screen, regardless of the video signal input.
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Displays the video to fit the PBP screen, regardless of the video signal input.
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Advertisement
Table of Contents
