Lenovo ThinkVision LT2323zwC User Manual page 18

Table 2-2. OSD functions
OSD Icon Submenu
on Main
Menu
Brightness
Brightness-
Contrast
/Contrast
light sensor
Horizontal Position
Image
Position
Vertical Position
Automatic
Image
Setup
Manual
Color
Preset mode
Image
Properties
Custom
Input Signal
Scaling
Over Drive
Image select menu
Dual
Image
select menu
Swap
Single
Single
* Note: Brightness and Contrast can not be adjusted in sRGB mode.
2-5 LT2323zwC Flat Panel Monitor User's Guide
Description
Adjusts overall brightness.
Adjusts difference between light and dark areas.
Monitor can detect environment luminance to adjust monitor's
brightness for power saving .
Moves the image left or right
Moves the image up or down.
Automatically optimizes the image.
Manually optimizes the image. See "Menual mage setup" page 3-4.
. Clock . Phase . Save
Adjusts intensity of red, green, and blue.
• Neutral • sRGB
. Red: Increases or decreases the saturation of "red" in the image.
. Green: Increases or decreases the saturation of "green" in the image.
. Blue: Increases or decreases the saturation of "blue" in the image.
Save: Saves the custom color choices.
This monitor can accept video signals through two different
connectors. Most desktop computers use a D-SUB connector.
Select digital among OSD Controls when you use DP connector.
. Selects D-SUB (Analog)
. Selects DP
Expends image size to full screen.
. Off (Original AR)
. On (Full)
Response time enhancement.
Image select menu
Dual Image Mode.
Swap left and right image.
Set analog input signal to full image.
Set Display port input signal to full image.
.
• Reddish • Bluish
Controls and Controls and
Adjustments
Adjustments
(Digital)
(Analog)
Same as
Analog
Controls
Locked not
required for
digital input
Same as
Analog