Scanning For A Number; Scanning For A Name; Number Of The Phone; Scratchpad Memory - Nokia User Manual

(If no name was stored with the number, the
display will be blank). Press
want to return to the number display.
Call the number by pressing

Scanning For A Number

To scan the entire memory, use the
keys to display the contents of the
memory locations in use. If you have just
recalled a memory location by number, the
scanning will start from that memory
location.
When you find the number you want, press
to make the call.

Scanning For A Name

Press .
Press to display the first and
display the last name in alphabetic order. To
display the other stored names, press the
arrow keys until you find the name you are
looking for.

Number Of The Phone

To check the number of your phone:
Key in 99 (memory location where the phone
number is stored).
Press Memory, Find.

Scratchpad Memory

again if you
In addition to its 97 permanent memory
locations, the phone has one short-term
.
memory location (00), where a telephone
number (and a name ) keyed in during a call is
temporarily stored. The number is cleared from
memory when the phone is switched off.
or
To move a number from the scratchpad memory
location to a permanent memory location, recall
it: 00 Memory, Find. Store the information as
described in Storing Information.
(When the location 00 is not in use, the phone's
SIS security reference code can be checked
to
there. The reference code is used by the NMT
network to register your phone.)
14
Key in a number (or a name in alpha mode)
during a call. The phone will automatically
store the number or name in the scratchpad
memory location when you end the call. Any
information previously stored in the
scratchpad memory will be lost.
È
1999 Nokia Mobile Phones. All Rights Reserved.