Packet Data; Monitor All Communication Events - Nokia N90 User Manual

To set the call duration to show on the display each time
a call is active, select
> Show call duration. Select
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see 'Security',
'Phone and SIM', p. 110.

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
36 Copyright © 2005 Nokia. All rights reserved.
My own > Log > Options >
Yes or No.
Options > Clear
, and select My own
To monitor all voice and video
Settings calls, text messages, or data
connections registered by the
device, press
> Log, and press
the general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the general
log to view just one type of event and create new contact
cards based on the log information.
Tip! If you want to see the duration of a voice call on
>
the main display during an active call, select
Settings >
Tip! To view a list of sent messages, press
select Messaging
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
To filter the log, select
, select My own
to open
Show call duration > Yes.
> Sent.
Options > Filter and a filter.
Options >
, and