Call Waiting; Options During A Voice Call - Nokia N90 User Manual

Nokia cell phone user guide
Hide thumbs Also See for N90:
Table of Contents

Advertisement

Tip! You can assign a ringing tone for video calls.
Press
and select
and
Options
>
In the Fold open mode, press
To start sending video, activate the Imaging mode, and a
live video image, recorded video clip, or the image being
captured by the camera in your device is shown to the
caller. If you want to send a live video image, turn the
camera unit to the direction from which you want to send
the video image. If you do not activate the Imaging mode,
video sending is not possible, but you can still hear the
other person. A grey screen is shown in place of the video.
To replace the grey screen with a still image, see 'Call
settings',
Image in video
Tip! To send video of yourself, in the Imaging mode
turn the camera unit so that the lens is facing you.
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera
is not active. You can, however, still see the video of the
recipient.
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
To end the video call, in the Imaging mode or in the Fold
open mode, press
34
Copyright © 2005 Nokia. All rights reserved.
Tools
> Profiles, select a profile
Personalise
>
Video call
tone.
to answer the video call.
call, p. 106.
.

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings
>
Call
>
Call
waiting.
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. Select
Options
>
Transfer
to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press
calls, select
Options
>
End all

Options during a voice call

Many of the options that you can use during a voice call
are network services. Select
of the following options:
Mute
Reject, Swap,
Hold
or Unhold,
loudsp., or
Activate handsfree
with Bluetooth connectivity is attached),
or
End all
calls,
New
call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send MMS
(in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
Call waiting
in
Tools
>
. The first call is put
. To end both
calls.
Options
during a call for some
or Unmute, Answer,
Activate
handset,
Activate
(if a compatible headset
End active call

Advertisement

Table of Contents
loading

Table of Contents