Smart Check; Interior Lamp (On Some Models) - Samsung DV9 Series User Manual

operating Instructions, tips

SMART CHECK

This function enables you to check the status of the dryer using a smartphone.
The Smart Check function has been optimized for:
Galaxy & iPhone series (cannot be supported for some models)
Downloading the Samsung Smart Washer app
Download the Samsung Smart Washer app to your mobile phone from the Android market or
Apple App store and install it. You can easily fi nd it by searching for "Samsung Smart Washer".
Using the Smart Check function
1. Hold down the Smart Check button for 3 seconds
when an error occurs to run the Smart Check function.
You can run the Smart Check function only once after
the dryer turns on. After that, the function is disabled,
and pressing the button for 3 seconds does not sound
a beep.
However, if you press the Smart Check button for less
than 3 seconds, this command is not recognized by
the dryer, causing an error beep.
2. The LED segments on the display panel rotate for 2 or
3 seconds and the Smart Check code is displayed on
the dryer's display panel.
3. Run the Samsung Smart Washer app on your smart phone and tap the Smart Check
button.
'Smart Check' may be changed to 'Smart Care' according to the language selection.
4. Focus your smart phone's camera on the Smart Check code displayed on the dryer's display
panel.
• If light from a light bulb, fl uorescent bulb or lamp is refl ected on the display panel of the dryer,
the smart phone may not be able to easily recognize the Smart Check code.
• If you hold the smart phone at a too wide angle relative to the front of the display panel, it
may not be able to recognize the error code. For best results, hold the smart phone so that
the front of the display panel and the smart phone are parallel or nearly parallel.
5. If it focuses correctly, the Smart Check code is automatically recognized, and the detailed
information of the status of your dryer, the error and the countermeasures are displayed on
your smart phone.
6. If the smart phone fails to recognize the Smart Check code more than twice, please enter the
Smart Check code displayed on your dryer's display panel into the Samsung Smart Washer
app manually.

INTERIOR LAMP (ON SOME MODELS)

Lights the dryer drum while the dryer is running.
Setting & releasing
If you want to set or release the Interior Lamp, press both the Lamp buttons simultaneously.
This can be set as long as the power is turned on. If you do not turn the Drum Light off
within 5 minutes of turning it on, it is automatically turned off .
DV90H8000HW-03407J-03_EN.indd Sec5:24 DV90H8000HW-03407J-03_EN.indd Sec5:24
English - 24
2/19/2016 3:23:03 PM 2/19/2016 3:23:03 PM