Pc Connectivity; Software Update - Nokia N800 User Manual

PC connectivity

You can connect your device to a compatible PC with the
supplied Nokia Connectivity Cable DKE-2 (USB). Use the
USB data cable to transfer files to a compatible memory
card and to update the latest software on your device.
When the USB cable is connected, the memory card of your
Nokia N800 is listed as a mass storage device on your PC,
and is displayed on your device. To be able to transfer
files from the PC to the device, you must have a compatible
memory card installed in the device.
When the USB cable is connected, you cannot access the
information on the memory card with your device. However,
you can transfer files from your PC to the memory card,
and view the contents of the memory card on your PC.
Important: Do not remove the USB cable in the
middle of an operation when the device is being
accessed. Removing the cable in the middle of an
operation may damage the memory card as well as
the device, and data stored may be corrupted.
When you are finished with file transfer, do not
just pull the USB cable from the PC, but follow the
proper procedures to disconnect your device from
the PC. For more information, see the user guide of
your PC.

Software update

To be able to update the software on your device, you must
first install the Nokia Internet Tablet Software Update
Wizard on your compatible PC. You must also have the USB
cable and a fully charged battery for your device.
For more information on the software update, check
www.nokia.com/n800.
Tip: To check the version number of the current
software on your device, tap
Tools > Control panel
, and select
> About product.
© 2006 Nokia. All rights reserved. 44