Date And Time; Security - Nokia N75 User Manual

R1114_en.book Page 104 Thursday, October 19, 2006 3:43 PM
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your USIM. You can save
these settings to your device, view, or delete them in
Configs..

Date and time

See "Clock settings," p. 21, and language settings in
"General," p. 99.

Security

Phone and SmartChip
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SmartChip cards. See "Glossary of
PIN and lock codes," p. 105.
PIN code, PIN2 code, and Lock
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of
104
these codes, contact your service provider. See "Glossary of
PIN and lock codes," p. 105.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
commands opens. Select
Lock if SChip
the lock code when an unknown SmartChip is inserted into
your device. The device maintains a list of SmartChip cards
that are recognized as the owner's cards.
Closed user
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
code—You can change the
into your device.
. A list of
Lock phone.
changed—You can set the device to ask for
group—You can specify a group of people to