Default Numbers And Addresses; Contact Groups; Add Ringing Tones For Addresses - Nokia N75 User Manual

R1114_en.book Page 70 Thursday, October 19, 2006 3:43 PM

Default numbers and addresses

You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In Addr. Book, select a contact, and press
2
Select Options > Defaults.
3 Select the number or address to which you want to
add a default value, and select Assign.
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.

Contact groups

To create a contact group, do the following:
1
In Addr. Book, press to open the groups list.
2 Select Options > New group.
3
Write a name for the group or use the default name
Group %N, and select OK.
4
Open the group, and select
5
Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
70
6
Select OK
To rename a group, select
new name, and select OK.
To add a contact to an existing contact group, select
Options >
To remove contacts from a group, do the following:
.
1 In the groups list, open the group you want to modify.
2
Select the contact and
3 Select Yes
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
groups.

Add ringing tones for addresses

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognizes it).
1
Press
and select a contact group.
2 Select Options
opens.
Options > Add members.
3 Select the ringing tone you want to use for the
to mark it. To add
individual contact or the selected group.
to add the contact to the group.
Options > Rename, enter the
Add to group: .
Options > Remove from
to remove the contact from the group.
Options > Belongs to
to open a contact card or go to the groups list,
> Ringing tone. A list of ringing tones
group.