Nokia N-GAGE QD User Manual page 163

To send text using Bluetooth connectivity (instead of text messages),
select Notes, write the text, and select
The game deck starts to search for devices within range. Enabled devices
that are within range start to appear on the display one by one. You can
see a device icon, the device's name, the device type, or a short name.
3 To interrupt the search, press Stop. The device list freezes, and you can
start to form a connection to one of the devices already found.
If you have searched for Bluetooth connectivity devices earlier, a list of
the devices that were found previously is shown first. To start a new
search, select More
cleared.
4 Scroll to the device with which you want to connect, and press Select.
5 Pairing (if not required by the other device, see step 6).
Pairing means authentication. The users of the enabled devices should
agree together what the passcode is and use the same passcode for both
devices in order to pair them. Devices that do not have a user interface
have a factory set passcode.
• If the other device requires pairing before data can be transmitted, a
tone sounds, and you are asked to enter a passcode.
• Create your own passcode (1–16 numeric characters), and agree with
the owner of the other Bluetooth device to use the same code. A
passcode is used only once.
Copyright
Options > Send > via
devices. If you switch off the game deck, the list is
©
2004 Nokia. All rights reserved.
Bluetooth.
163