Shark NV480UKR Owner's Manual page 4

ASSEMBLY 1 Place the vacuum body onto power nozzle.
2 Insert extension wand into top of the vacuum.
3 Insert handle into the top of the extension wand (if not already assembled).
4
Insert hose into hose connector.
5
Insert the crevice tool and dusting brush onto the accessory holder as shown.
6 The accessory holder is removable. To remove, first remove the dust cup (page 8), then hold and pull the tab to the left and pull out. To
replace, align the pins into the hinge on the vacuum and clip back into place.
1
CLICK
4
2
CLICK
3
CLICK
4
CLICK
6
5