Temperature
/
Humidity
Mounting
Certifications
System tour
Refer to the figures below to identify the components of the system.
Front Panel
Power Switch (with Power LED)
The power push button allows powering ON and OFF the system.
Clear CMOS Button
To clear the CMOS, use the tip of a pen to press the button briefly (for less than
three seconds).
HDD LED ( Red )
The hard disk LED blinks when data is being written into or read from the HDD.
WiFi LED ( Green )
When the data is Transferring, the WiFi LED will blink.
Output: 90W, +19VDC/ 4.74A output
Operating: 0°C ~ 50°C / 32°F ~ 122°F, 0% ~ 90%, non-condensing
Storage: -20°C ~ 80°C / -4°F ~ 176°F, 0% ~ 90%, non-condensing
VESA mount
CE, FCC Class A
Table 1 QDSP-6000 Series Specification
Figure 1 Front Panel
Chapter 1