Conference Call Settings; Conference Service Number Settings; Open The Contacts Directory; Turn The Microphone On And Off - Nokia E65 User Manual

T e l e p h o n e
4. A list of the selected participants opens. To call a participant, scroll to it and press the conference key.
5. After the call has been answered, select
from the call, select Drop.
6. Repeat steps 3 and 4 until all the participants have been called.
7. After the final participant has answered your call, press the conference key. All the calls are merged into a conference call.
8. To end the active conference call, press the end key.
Tip: You can also add a group of participants to an active conference call as long as the number of conference call
participants does not exceed the maximum number.
Merge two ongoing calls into a conference call
You can merge an active call and a call on hold into a conference call.
1. Press the conference key.
2. When Combine calls?
3. To end the active conference call, press the end key.
Tip: The merged calls can also be conference calls as long as the number of conference call participants does not exceed
the maximum number.

Conference call settings

Select Menu Tools Settings
> >
To select whether to use the conference service number or the conference group as the default, select
To set the default conference service number, select
To set the default conference group of contacts, select Group.
To delete the default conference group of contacts, select
Tip: To easily access the conference call settings when no default conference number has been set, press the conference
key in the active standby mode, and select

Conference service number settings

Select Menu Tools Settings
> >
To enter the default conference service number, select
To set a conference call ID for the default conference service number, select
To set a conference call PIN code for the default conference service number, select
You can only set the conference call ID and PIN if you have defined the default conference service number.
Tip: If your conference call service requires additional DTMF (dual tone multi-frequency) commands, such as #, you can
add them after each identification code.

Open the Contacts directory

To access Contacts from any application, press the contacts key.

Turn the microphone on and off

To turn the microphone off during an active voice call or video call, press the mute key. To turn the microphone back on, press
the mute key again.

Access a selected application quickly

Configure the Own key to open any application, web page, or bookmark that you often need and want to access quickly.
To configure the Own key, select
Tip: You can also press and hold the Own key to configure it.

Options during a call

Select Options for the following options during a call:
Mute — Your voice cannot be heard by the other parties of a call while you listen to the active conversation.
•
Unmute — Your voice can be heard again by the other parties of the call.
•
© 2007 Nokia. All rights reserved.
Add to conf.
is displayed, select Yes. The calls are merged into a conference call.
Conf. call.
>
Conf. call Service
> >
Menu Tools
> >
to join the participant in the conference call. To drop the participant
Service number.
Options Clear default
>
Default number > Yes.
number.
Conference call number.
Own key.
24
group.
Conference call ID.
Conference call PIN.
Conference in use.