Setting This Stand - Sony RHT-G900 Operating Instructions Manual

Setting this stand

Installing the top glass panel
Refer to "How to install the top glass panel"
supplied with this stand.
Preventing the TV from
toppling over
As a protective measure, secure the TV.
Perform following steps as a protective measure
if you have a Sony LCD TV.
1
Place the TV on the center of the stand.
Install the TV so that the TV does not hide
the top panel display of the stand.
Downloaded From TheatreSystem-Manual.com Manuals
2
3
4
Installing the shelf board
(RHT-G900 only)
1
2
(large)
(small)
Fasten the support belt (supplied) to
the stand with the small screw
(supplied).
Tighten the screw upward into the underside
hole, as in the illustration.
Fit the support belt to the stand, then
firmly fasten with the large screw
(supplied) using a screw driver or coin,
etc.
While supporting the TV, tighten the
support belt to secure in place.
Insert the attaching shelf support pins
(supplied) into the holes in the stand.
Fit the shelf board onto the shelf
support pins horizontally. This requires
people.
continued
9
GB