Page 1
DIGITAL COOKING MASTER PLA1027 Instruction Manual Due to ongoing product improvements, specifications and accessories may change without notice. Actual product may differ slightly to that depicted...
Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other packaging components. They may be potentially dangerous to children. TECHNICAL SPECIFICATION Model PLA1027 220-240V ~ 50 Hz 1500 Watts Due to ongoing product improvements, specifications and accessories may change without...
Page 3
GENERAL AND ELECTRICAL SAFETY Do not use this appliance for any use other than its intended purpose When using electric appliances always observe safety regulations where applicable to reduce the risk of fire, electric shock and personal injury. Always check that the power supply corresponds to the voltage on the rating plate.
Page 4
DIAGRAM Transparent Glass Cover Non-stick heating pot Body Control panel LED display Base NOTE: Cooking functions listed in this manual are suggestions only and it is recommended that you conduct appropriate tests under your own operating conditions prior to adoption.
Before First Use Before using your Cooking Master, please ensure you read all safety and operating instructions thoroughly, and follow the below steps prior to use. Remove all packaging materials (including the polystyrene under the pan) and literature from inside gift box.
Page 6
4. “Function” a. Keep warm: put the food directly in the non-stick heating pot, and then close the lid. Press the "TEMP" button and the temperature indicator will display 80 degrees, and display on LED screen starts flashing. Press the “power” key, the time on the LED display will stop flashing and enter into keep warm status.
Page 7
g. Hot Pot: Place your Food into non-stick heating pot. Press the "Temp" key to 220-240℃, the corresponding temperature indicator shall be on and the temperature symbol on the LED display will blink. Press the "POWER” function key to start, and the LED display will stop flashing.
Need help?
Do you have a question about the PLA1027 and is the answer not in the manual?
Questions and answers