Capturing Video And Time Lapse Photos - GoPro Hero 4 User Manual

/ Capturing Video and Time Lapse Photos

When your camera is not connected to a GoPro remote (sold
separately) or the GoPro App, two capture modes are available: Video
and Time Lapse. To access more modes, see
Settings (page 23).
CAPTURING VIDEO
The default video resolution is 1080p30. To select a different resolution,
see Changing Video and Time Lapse Settings
To Start Recording Video:
Short press the Shutter/Select button [
on, emits three beeps, and automatically begins recording video.
The camera status lights blink while the camera is recording.
16
Accessing All Camera
(page 21).
]. Your camera powers
/ Capturing Video and Time Lapse Photos
If the memory card is full or the battery is out of power, your
camera automatically stops recording and saves the video before
powering off.
To Stop Recording:
Short press the Shutter/Select button [
recording, beeps several times, and automatically powers off to
maximize battery life.
PRO TIP: You can turn off the camera status lights and your camera's
sound. For more information, see
]. The camera stops
Setup Mode (page 56).
17