Advertisement
SOFT LED 4
165W LED SOFTLIGHT 100/120V or 230/240V 50/60 Hz
(white light, with interchangeable Remote Phosphors Panel for either
Tungsten or Daylight balanced Correlated Color Temperature)
INSTRUCTION MANUAL
Manual Operated
(Pole Operated available, not shown)
MANUFACTURER
REPRESENTATIVE
ILT Italy S.r.l.
Via Cancelliera # 10a, 00041 Albano Laziale (Rome- Italy).
Tel. +39/06/902901 Fax. +39/06/90231051
desisti@desisti.it
U.R.L.: www.desisti.it
E-mail:
1. INTRODUCTION
Congratulations on your purchase of a SOFT LED 4 lighting fixture.
Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in design
innovation and manufacturing of lighting products for the professional Entertainment Industry means you can
depend upon the quality of this product.
The SOFT LED 4 is a innovative Remote Phosphors 165W LED SOFTLIGHT, with a COLOR RENDERING INDEX –
CRI higher than 95 for the Tungsten CCT and Higher than 91 for the Daylight CCT; it provides a smooth and soft
shadow projecting beam, yet within a controlled field that makes it ideal for multiple camera set ups.
The Lighting Fixture is DMX Controlled and includes a number of parameters that can be set locally, it is equipped
with either a 100/120V or a 230/240V 50/60Hz power supply for AC feed and the front Remote Phosphors Panel
is easily interchangeable and it is available with either Tungsten or Daylight Balanced CCT.
Standard accessories are available such as Black or White Honeycombs with either narrow or medium cells for
different beam shaping and control, Colour Frame and a Beam Intensifier .
Pag 1.
This Manual is applicable to the
Revised April 2nd 2015
De Sisti SOFT LED 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Desisti SOFT LED 4
Summary of Contents for Desisti SOFT LED 4
- Page 1 The SOFT LED 4 is a innovative Remote Phosphors 165W LED SOFTLIGHT, with a COLOR RENDERING INDEX – CRI higher than 95 for the Tungsten CCT and Higher than 91 for the Daylight CCT; it provides a smooth and soft shadow projecting beam, yet within a controlled field that makes it ideal for multiple camera set ups.
- Page 2 2. YOKE AND ACCESSORIES ASSEMBLY Pag 2. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4...
-
Page 3: Daisy Chain
It is recommended to Daisy Chain a Max of 10 fixtures, even if the limitations imposed by DMX Standards are for an higher q.ty of units and even if the Powercon Connections are rated for 20A max. Pag 3. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4... -
Page 4: Safety Instructions
Do not operate the product if the ambient temperature exceeds 40° C • Provide a minimum clearance of 0,1m (4 in.) around fans and air vents. • Pag 4. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4... -
Page 5: Local Menu
In AUTO mode: the light will ignore any DMX control. In this mode any local dimming setting will be maintained and will be automatically recalled after power off, when turning the power on again. Pag 5. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4... - Page 6 Class 1– ground connection required Front 37,7cm.(base) x 29,1cm. (height) = Ü Front Fixture’s Opening Ü surface 1.097 cm Specifications subject to change without notice. Pag 6. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4...
-
Page 7: Safety Standards
Help preserve the environment! Ensure that this product is recycled at the end of its life. This product is in compliance with the RoHS and WEEE directives. Pag 7. This Manual is applicable to the Revised April 2nd 2015 De Sisti SOFT LED 4...
Need help?
Do you have a question about the SOFT LED 4 and is the answer not in the manual?
Questions and answers