Application Page Cgi Command - Otima ANC-818 User Manual

recall Text
than 30 characters
return <return page>

Application page CGI command

Note: This request requires administrator privilege.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/gen-eventd-conf.cgi?[ snapshot_enable=<value>]
[&weekday=<value>][&time_method=<value>][&begin_time=<value>]
[&end_time=<value>]
[&ss_prefix=<value>][&trigger_type=<value>]
[&md_prenum=<value>][&md_postnum=<value>][&md_delay=<value>]
[&sq_interval=<value>]
[&send_method=<value][&ftp_suffix=<value>]
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <length>\r\n
\r\n
<depends on method value>
If(method == get || method == set)
{
tue=<value>\r\n
wed=<value>\r\n
string less One of the present positions to recall.
Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according to the
current path. If you omit this parameter, it will
redirect to an empty page.
- 70 -