Appendix; Troubleshooting; Status Led; Reset And Restore - Otima ANC-818 User Manual

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.
Condition
Loading system after power on
During booting procedure
Detecting and setting network
After network is setup (system up)
During the upgrade firmware process
Enable audio

Reset and restore

LED color
Steady red
Steady green, blue and red
Steady green and blue. Blink red till IP
address is confirmed
Blink green every second and steady red
Blink green every second and fast blink red
Steady blue. Disable audio will turn off blue
LED.
There is a button in the back side of the
Network Camera. It is used to reset the
system or restore the factory default
settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
- 53 -