Samsung GX-1L User Manual page 156

Using an External Flash (Optional)
Using High-Speed Flash Sync Mode
With the SEF-36PZF, you can discharge the flash to take a picture at a shutter speed faster than
1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless.
Attaching and Using the SEF-36PZF on the Camera
1. Remove the hot shoe cover and attach the SEF-36PZF.
2. Turn the mode dial and set the exposure mode to
3. Turn on the SEF-36PZF.
4. Set the SEF-36PZF sync mode to HS (high-speed flash sync.).
5. Confirm that the SEF-36PZF is fully charged and then take the picture.
INFORMATION
The will light in the viewfinder when the flash is ready (fully charged).
High-speed flash sync is only available when the shutter speed is faster than 1/180 sec.
High-speed flash sync is not available when the exposure mode is set to
See the SEF-36PZF operating manual for details.
Using in Wireless Mode
Shoot using the flash without connecting the camera and flash with a cord by using two SEF-36PZF
units.The High-speed sync mode is also available in wireless mode.
INFORMATION
Be sure to set the two SEF-36PZF units to the same channel. See the SEF-36PZF operating
manual for details.
Downloaded From camera-usermanual.com Samsung Manuals
or .
(Bulb).
155