IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT The exclamation point within an equilateral REMOVE COVER (OR BACK).
Page 3
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions.
Page 4
IMPORTANT SAFETY INSTRUCTIONS 17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
Page 5
IMPORTANT SAFETY INSTRUCTIONS CONTINUED NOTES ON MOISTURE CONDENSATION: NOTES ON HANDLING: Moisture condensation damages the DVD player. When shipping the DVD player, always use the Please read the following carefully. original shipping carton and packing materials. Moisture condensation occurs, for example, when you For maximum protection, repack the unit as it pour a cold drink into a glass on a warm day.
ABOUT DISCS ABOUT DISCS The region number for this DVD Player is: See the following page for information regarding region numbers. PLAYABLE DISCS: The following discs can be played back on this DVD player: DISC TYPES: Data on most DVDs is divided into sections called titles and then into subsections called chapters, each of which is given a title or chapter number.
LOCATION OF CONTROLS 1.Disc Tray 2.Remote Sensor (Open/Close) Button (Standby) Button 5.Standby lndicator eft/Righ 6. Audi ut acks 7.Component Video (Y,Pb,Pr) DC IN 5V,1.2A Output Jacks 8.VIDEO OUT ack 9.DC IN Jack 5V, 1.2A - 6-...
Page 8
LOCATION OF FEATURES 1. OPEN/CLOSE Button 2. 0–9, 10+ Buttons 3. MENU Button 4. ENTER Button Buttons Direction Button Button OSD (On Screen Display) Button 9. SUBTITLE Button 10. N/P Button (NTSC/PAL) 11. ANGLE Button 12. ZOOM Button 13. REPEAT Button 14.
BATTERY INSTALLATION directions. ) WIDE VIDEO RANDOM GOTO Remarks: Remarks: Remarks: 1. When there is an obstacle between the unit and the transmitter, the transmitter may not operation. 2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote control of the unit, the remote operation may be unstable.
CONNECT TO TV: Connect to TV through AV (Video/Audio) Output Jacks (AV Connection cable included ): DC IN 5V,1.2A supplied Connect (YUV Connection cable NOT included ): DC IN 5V,1.2A Connection cables not included...
Page 11
DVD PLAYBACK OPERATIONS Playback of a DVD: 1. Connect the unit to AC/DC Adaptor and connect AC/DC Adaptor to AC power as previous procedures. The Red Indicator will light. 2. Press the Button on the unit or on the Remote Control to power on the unit. The color of Indicator will turn to Green.
OPERATIONS Playback of a JPEG PICTURE MP3 disc: 1. Turn on the player and place the disc into the player as previous procedures. The folder/files list will appear on the screen. 2. Use the Direction Buttons to select and highlight the desired folder then press the ENTER Button to enter. The file list will appear on the screen.
Page 13
OPERATIONS OSD (On Screen Display) A-B Repeat During playback, press the OSD Button repeatedly to During playback, press the A-B Button to define where read the information of playback status. you want the section to start. Press the A-BButton again to define where you would like the section to end, the STEP unit will then plays the selected section repeatedly...
SYSTEM SETUP Setting Menus: ◄, ►, ▲, ▼ In stop playback mode, press the SETUP Button, the setting menu will appear on the screen as below. Using the Direction Buttons to select and hightlight the function you need to set or reset. Press the ENTER Button to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
Page 15
SYSTEM SETUP Video Setup Page: 1. If Output Mode is selected, using the Direction and ENTER Buttons to set it to CVBS or YUV as the connection of TV. ~ Set to CVBS if you connected TV through the Video/Audio Output Jacks as page 9. ~ Set to YUV if you connected TV through the Y;...
CARE AND MAINTENANCE Caring for Discs Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc.
TROUBLESHOOTING GUIDE Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION GENERAL Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the No power. AC/DC Adaptor unplugged. rear of Player. Insert the AC/DC Adaptor into a conveniently located AC outlet Unplug the unit and wait about one to Condensation has formed.
SPECIFICATIONS Power Source 5 V; 1.2A Power source of the Remote Control 3V, 2 x AAA size batteries, included NTSC/PAL Color System Discs Played: DVD-VIDEO Disc 12cm single-sided, single layer 12cm single-sided, dual layer 12cm double-sided, single layer 8cm single-sided, single layer 8cm single-sided, dual layer 8cm double-sided, single layer COMPACT DISC (CD)
Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state.
Need help?
Do you have a question about the CVD512a and is the answer not in the manual?
Questions and answers