Do you have a question about the CVD401A and is the answer not in the manual?
Questions and answers
Susan Ploehn
February 5, 2025
craig dvd model cvd401a green light wouldn't turn on. power is turn on. Red light on dvd. Tried turning it on via dvd and remote. wouldn't turn on. Only 1 month old.
1 comments:
Mr. Anderson
February 10, 2025
The green light won't turn on because the player is in standby mode. The red light indicates standby mode, and to fully power on the player, you need to press the power button. If the issue persists, check the power connection and ensure the AC/DC adapter is properly plugged in.
4gb mp3 plus video player with 1.8 inch color display (21 pages)
Summary of Contents for Craig CVD401A
Page 1
HDMI DVD PLAYER HDMI DVD PLAYER Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: CVD401a Size: 148.5(W) x 210(H)mm (A5)
Page 3
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions.
Page 4
17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
Page 5
Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the rear of Player. Insert the AC/DC Adaptor into a conveniently located AC outlet having AC 100-240V~, 50/60 Hz. AC Outlet Adaptor Plug...
Page 6
ABOUT DISCS ABOUT DISCS The region number for this DVD Player is: See the following page for information regarding region numbers. PLAYABLE DISCS: The following discs can be played back on this DVD player: DISC TYPES: Data on most DVDs is divided into sections called titles and then into subsections called chapters, each of which is given a title or chapter number.
LOCATION OF CONTROLS FRONT PANEL INFORMATION STANDBY Open/Close Button 4. Remote Sensor Standby Button 5 STANDBY Indicator 3. Disc Tray REAR PANEL INFORMATION DC IN 5V,1.2A HDMI 1. Component Y utput Jack . Audi ( l t ) utput Jack utput Jack utput Jack 2.
BATTERY INSTALLATION 1. Press the tabs on the battery door and lifting it off. 2. Install two (2) x AAA size batteries (included) into the battery compartment as the figure on right and the polarity markings inside battery compartment. 3. Replace the battery door. directions.
Page 10
CONNECTION TO TV Connect to TV through AV (Video/Audio) Output Jacks (AV Connection cable included ): DC IN 5V,1.2A HDMI Vide o = Y ellow, Audio Lef t = W hite, Audio Righ t = R Yellow Supplied RCA Connection Cable HDMI Y Pb/Cb Pr/Cr White...
Page 11
CONNECTION TO TV THROUGH HDMI OUTPUT JACKS Connection to TV through HDMI Port (HDMI Connection cable NOT included ): DC IN 5V,1.2A HDMI Connection Cable not included Y Pb/Cb Pr/Cr HDMI -10-...
OPERATIONS Playback of a DVD: Connect the DVD Player to the TV as previous procedures. 2. Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the rear of Player. Insert the AC/DC Adaptor into a conveniently located AC outlet having AC 100-240V~, 50/60Hz.
Page 13
OPERATIONS CONTROLS: Slow motion playback: During playback, press the SLOW Button repeatedly to set the speed and playback the video in slow motion. Press the Play/Pause Button to resume normal playback. GOTO To playback the desired title and chapter, press the GOTO Button once, the Title and Chapter selection on menu will appear on the screen.
Page 14
OPERATIONS DVD Menu: Press the MENU Button , the menu of the current DVD will appear on the screen. Use the direction buttons to select the desired option, and then press the ENTER Button to confirmed the selection. This function is not available on all discs.
Page 15
OPERATIONS Playback of a CD: 1. Connected the DVD Player to the TV and power on it as previous procedures. 2. Press the OPEN/CLOSE ( ) Button to open the disc tray . Place the disc on the center of tray with label side face up.
Page 16
OPERATIONS Repeat Playback: During playback, press the REPEAT Button once; “ Track ” will appear on the screen then the current Chapter will be playback repeatedly and continuously. All ” will appear on the screen then all tracks on the current disc Press the REPEAT Button twice twice, “...
Page 17
OPERATIONS Playback of a JPEG PICTURE MP3 disc: 1. Turn on the player and place the disc into the player as previous procedures. The folder/files list will appear on the screen. 2. Use the direction buttons to select and highlight the desired folder then press the ENTER button to enter. The file list will appear on the screen.
SYSTEM SETUP Setting Menus: menu will appear on the screen as below. Using the Direction ◄, ►, ▲, ▼ Press the SETUP Button, the setting you need to set or reset. Press the ENTER Button to enter or confirmed Buttons to select and highlight the function the selection.
Page 19
SYSTEM SETUP Video Setup Page: 1. If Component is selected, using the Direction and ENTER Buttons to set it to CVBS or YUV as the connection of TV. ~ Set to CVBS if you connected TV through the Video/Audio Output Jacks as page 9. ~ Set to YUV if you connected TV through the Y;...
CARE AND MAINTENANCE Caring for Discs Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc.
TROUBLESHOOTING GUIDE Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION DVD Player Insert the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the No power. AC/DC Adaptor unplugged. rear of Player. Insert the AC/DC Adaptor into a conveniently located AC outlet Unplug the unit and wait about one to Condensation has formed.
SPECIFICATIONS Power Source: DVD Player 5V, 1.2A, , Max. 6W 3V, 2 x AAA size batteries, included Remote Control Signal System NTSC/PAL Discs Played: DVD-VIDEO Disc 12cm single-sided, single layer 12cm single-sided, dual layer 12cm double-sided, single layer 8cm single-sided, single layer 8cm single-sided, dual layer 8cm double-sided, single layer COMPACT DISC (VIDEO CD)
Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state.
Need help?
Do you have a question about the CVD401A and is the answer not in the manual?
Questions and answers
craig dvd model cvd401a green light wouldn't turn on. power is turn on. Red light on dvd. Tried turning it on via dvd and remote. wouldn't turn on. Only 1 month old.
The green light won't turn on because the player is in standby mode. The red light indicates standby mode, and to fully power on the player, you need to press the power button. If the issue persists, check the power connection and ensure the AC/DC adapter is properly plugged in.
This answer is automatically generated