Using Data Communication Applications - Nokia 7250 User Manual

Note that the use of HSCSD service consumes the phone's battery faster than
normal voice or data calls. You may need to connect the phone to a charger for
the duration of data transfer.
See GPRS modem settings

■ Using data communication applications

For information on using a data communication application, refer to the
documentation provided with it.
1. If you use an IR connection:
• Activate the IR connection in the phone, see
sure that the connection is active in your PC.
If you use the cable DKU-5:
• Connect the cable to the USB port on the back of your computer and to the
connector on your phone.
2. Start using the data communications application on the computer.
Note that making or answering phone calls during a computer connection is not
recommended as it might disrupt the operation.
For a better performance during data calls, place the phone on a stationary
surface with the keypad facing downward. Do not move the phone by holding it in
your hand during a data call.
Copyright
on page 120.
‹
2003 Nokia. All rights reserved.
Infrared on page 118. Make
136