NextBase 312GW Instruction Manual page 50

PLAYBACK SOFTWARE FOR WINDOWS (CONTD.)
Using the player:
Connect the iN-CAR CAM to your computer using the supplied USB cable, select Mass Storage and
press 'OK' (upon the iN-CAR CAM).
Once connected, the memory card which is labeled 'NEXTBASE' and its contents will be available to
view upon your PC, as a new drive, when using Windows explorer.
Close any pop up messages and/or any media players which may automatically open when video
or photo files stored upon a memory card are detected.
The alternative method to access the recorded files is to remove the MicroSD Card from your
iN-CAR CAM and using a suitable MicroSD adaptor insert it directly to the card reader on your PC.
The files are then visible using Windows explorer as normal.
Open the player by double-clicking on the DATAKAM PLAYER icon which you placed on your desktop.
To add videos for viewing with the player click on the green '+' button, this will open a new window
allowing you to locate the required video files, see image below.
'ADD'
button
The SD card will have been renamed as 'NEXTBASE', so you can see it easily. The video recordings
are in the 'Video' directory.
Once you have opened the video directory, select the required video clip recordings and click 'Open'
to add the files to the players play list.
Note:
- The player will group files from the same journey into a single entry within the file list window.
- Not all functions and features of the supplied playback software may be available, this is due to the
player being 'open-source' and for use across a wide range of devices from various manufacturers.
See next page for instructions on using the player.
50