Table of Contents
Advertisement
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR
devices. This device is a Class 1 Laser product.
Sending and receiving data via IR
• Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between them. The preferable
distance between the two devices in an infrared connection should be one
metre at most.
• To activate the IR port of your phone to receive data via IR, press
select Settings,
Connectivity
• The user of the sending phone selects the desired IR function to start data
transfer.
If the data transfer is not started within two minutes of the activation of the IR
port, the connection is cancelled and has to be started again.
IR connection indicator
• When
is shown continuously, the IR connection has been activated and
your phone is ready to send or receive data via its IR port.
• When
blinks, your phone is trying to connect to the other device or a
connection has been lost.
Note that the IR connection deactivates automatically.
EGPRS
GPRS (General Packet Radio Service) is a network service that allows mobile
phones to be used for sending and receiving data over an Internet Protocol (IP)-
based network.
and Infrared.
©
Copyright
2004 Nokia. All rights reserved.
Menu
and
123
Advertisement
Table of Contents
