Whirlpool ADP 4730 WH Service Manual page 4

14.06.2004 / Page 4
Doc. No: 4812 728 11354
Technical data
Water softener setting
To change the water softener setting:
• Push the POWER button on
• Change to program 2
• Hold the START button for 5 seconds until the LED is flashing
• Water softener setting is shown by flashing LED
• By pushing the START button you can change the setting
• Push the POWER button off to save and exit the water softener setting
Water hardness
1 soft
1 - 2 soft/ medium
2 medium
3 medium/ hard
4 hard
4 very hard
4 extremely hard
Accesory
If you need spare parts apart from the spare part list have a look in the
Service Bulletin 4812 718 40084.
ADP 4730 WH
8511 560 10810
German degrees French degrees
˚dH ˚fH
0 - 5 0 - 9
6 - 10 10 - 18
11 - 15 19 - 27
16 - 21 28 - 37
22 - 28 38 - 50
29 - 35 51 - 63
36 - 60 64 - 107
Whirlpool Europe
Customer Service
English degrees mmol/l
Clarke ˚e
0 - 6,3 0 - 0.9
7 - 12.6 1 - 1.8
13.3 - 18.9 1.9 - 2.7
19.6 - 25.9 2.8 - 3.7
26.6 - 35 3.8 - 5.0
35.7 - 44.1 5.1 - 6.3
44.8 - 74.9 6.4 - 10.7
S E R V I C E
Water softener setting is
shown by flashing LED
1 x
2 x
3 x
4 x
5 x
6 x
7 x