Update Device Software - Nokia 6730 User Manual

You can connect to a server, and receive configuration
settings for your device. You may receive server profiles and
different configuration settings from your service providers
or company information management department.
Configuration settings may include connection and other
settings used by different applications in your device. The
available options may vary.
The remote configuration connection is usually started by the
server when the device settings need to be updated.
To create a new server profile, select
profiles Options New server
> >
You may receive these settings from your service provider in
a configuration message. If not, define the following:
Server name — Enter a name for the configuration
●
server.
Server ID — Enter the unique ID to identify the
●
configuration server.
Server password — Enter a password to identify your
●
device to the server.
Session mode — Select the preferred connection type.
●
Access point — Select the access point to use for the
●
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet as the bearer type.
Host address — Enter the web address of the
●
configuration server.
Port — Enter the port number of the server.
●
User name and Password
●
password for the configuration server.
© 2009 Nokia. All rights reserved.
Options Server
>
profile.
— Enter your user ID and
Allow configuration
●
initiate a configuration session.
Auto-accept all requests
●
the server to ask for your confirmation when it initiates a
configuration session.
Network authentication
●
authentication.
Network user name
●
your user ID and password for the http authentication.
This setting is available only if you have selected
authentication to be used.
To connect to the server and receive configuration settings
for your device, select Options
To view the configuration log of the selected profile, select
Options View log.
>
To update the device software over the air, select
Settings. The update does not erase your settings. When you
receive the update package on your device, follow the
instructions on the display. Your device is restarted once the
installation is complete. Downloading software updates may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Make sure that the device battery has enough power, or
connect the charger before starting the update.

Update device software

Software updates may include new features and enhanced
functions that were not available at the time of purchase of
Data management
— Select Yes to allow the server to
— Select Yes if you do not want
— Select whether to use http
and Network password
Start configuration.
>
— Enter
Network
Options
>
55