Logitech ConferenceCam CC3000e Setup Manual page 9

• Far end control: By selecting this key
and downloading the application from
www.logitech.com/support/cc3000e,
you may control the pan, tilt and zoom
of a remote ConferenceCam CC3000e or
a ConferenceCam BCC950 in supported
applications. Camera selection and pan,
tilt and zoom tools are also available from
the downloadable application for PC
as well as ability to disable this feature
locally. Please visit the download page
listed for more information.
• Volume: Volume Up and Down
adjusts volume.
• Mute: Mute audio with Mute button.
• Calling: Run video conferencing software.
Answer picks up call. Hang up ends call.
Note: Answer and Hang up buttons may not work
in some applications. Use video conferencing
software to answer and end call. To enable answer
and hangup buttons for Skype or Cisco Jabber,
please download the respective plug-ins available
from www.logitech.com/support/cc3000e.
Logitech ConferenceCam CC3000e
• Speakerphone Activity light indications
Blue: ConferenceCam is in active call.
Blinking blue: Call is being received.
Blinking blue light in call: Call has been
put on hold (from hold function in
application) Speakerphone blue activity
light may not work in some applications.
Red: Audio is muted.
• LCD Activity: The LCD will display
call activity as well as volume and
connectivity status.
• Bluetooth: To connect CC3000e
speakerphone to your mobile device for
speakerphone broadcast of call:
– If your device is NFC enabled, touch
the mobile device to the NFC icon on
the speakerphone, which should enable
Bluetooth acceptance on the mobile
device OR
– Hold down the Bluetooth button until
the blue LED on the speakerphone
starts blinking rapidly. On your mobile
device, go to settings and
turn on Bluetooth.
– When the CC3000e is paired and
connected, the icon will appear bright
and when paired but not connected,
it will be greyed out.
English 9