Logitech ConferenceCam CC3000e Setup Manual page 7

5. Start your video or audio call from
your application. The LEDs on
the camera and speakerphone will
alight when streaming, and the LCD
will display call information depending
on your application's support.
6. To connect CC3000e speakerphone
to your mobile device:
• If your device is NFC enabled,
touch the mobile device to
the NFC icon on the speakerphone,
which should enable Bluetooth
acceptance on the mobile device OR
• Hold down the Bluetooth button
until the blue LED on the speaker-
phone starts blinking rapidly.
On your mobile device, go to settings
and turn on Bluetooth.
Logitech ConferenceCam CC3000e
• When the CC3000e is paired and
connected, the icon will appear bright
and when paired but not connected,
it will be greyed out.
• Note: The CC3000e cannot pair
to Bluetooth while streaming to USB.
If an attempt is made to pair to
a mobile device while in a USB call,
an error beep will sound. Please wait
till the USB call is complete before
pairing your mobile device.
English 7