Nokia 6681 User Manual page 55

Nokia cell phone user's manual
Hide thumbs Also See for 6681:
Table of Contents

Advertisement

Access point in use (Must be
Internet access point (IAP) for the mailbox. See
'Connection settings', p. 88.
My e-mail address (Must be
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server (Must be
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
Send
message—Define how e-mail is sent from your
phone. Select
Immediately
mailbox when you select
Send
conn.
avail.—E-mail is sent when the connection to the
remote mailbox is available.
User
name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server (Must be
address or host name of the mail server that receives your
e-mail.
defined)—Choose an
defined)—Enter the e-mail
defined)—Enter the IP
for the device to connect to the
message. Select
When
defined)—Enter the IP
Mailbox
type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are
POP3
and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you are using the POP3
protocol, e-mail messages are not updated automatically
in online mode. To see the latest e-mail messages, you
must disconnect and make a new connection to your
mailbox.
Security
(ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
APOP secure login
(not shown if IMAP4 is selected for
Mailbox
type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server
while connecting to the mailbox.
User
settings:
E-mails to retrieve
(not shown if the e-mail protocol is set
to POP3)—Define how many new e-mails are retrieved to
the mailbox.
Retrieve—Define which parts of the e-mails are retrieved:
Headers
only,
Partially
(kB), or
if the e-mail protocol is set to IMAP4).
Retrieve attachments
(not shown if the e-mail protocol
is set to POP3)—Choose whether you want to retrieve
e-mail with or without attachments.
Copyright © 2005 Nokia. All rights reserved.
Msgs. & attachs.
(not shown
55

Advertisement

Table of Contents
loading

Table of Contents