Packet Data; Monitor All Communication Events - Nokia 6681 User Manual

Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see 'Security',
'Phone and SIM', p. 91.

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
24 Copyright © 2005 Nokia. All rights reserved.
Options > Clear
, and select Connect. >
To monitor all calls, text
messages, or data connections
registered by the phone, press
, select Connect. > Log, and
press to open the general
log. For each communication
event, you can see the sender or
recipient name, phone number,
name of the service provider, or
access point. You can filter the
general log to view just one
type of event and create new contact cards based on the
log information.
Tip! To view a list of sent messages, press
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
Note: When sending messages, your phone may
display Sent. This is an indication that the message has
been sent by your phone to the message centre number
programmed into your phone. This is not an indication
that the message has been received at the intended
destination. For more details about messaging services,
check with your service provider.
, and