Answer A Call - Nokia 6670 User Manual

To have a private conversation with one of the participants, select Options >
Conference > Private. Scroll to the desired participant, and press Private. The
conference call is put on hold in your phone, and the other participants can still
continue talking with each other while you have a private discussion with one
participant only. Once you have finished the private conversation, select
Options > Conference to return to the conference call.
To drop one participant from the conference call, select Options > Conference >
Drop participant; then scroll to the participant, and press Drop.
The quickest way to make a new call is to dial the number, and press the
Send key to start the call. The existing call is automatically put on hold.

• ANSWER A CALL

To answer an incoming call, press the Send key.
To end the call, press the End key.
If you do not want to answer a call, press the
End key.
When a call comes in, select Silence to quickly
mute the ringing tone.
Options during a call
Select Options during a call for some of the
following options: Answer, Decline, Swap,
Activate loudsp. or Activate handset, End active
call, End all calls, Hold or Unhold, Mute or
Unmute, Conference, Transfer, Send touch tones, and Help.
You might not have all of these options. Contact your service provider for
more details.
Loudspeaker and Handset may be displayed as options for the Right selection
key and can be used as shortcuts for Activate handsfree and Deactivate
handsfree, respectively.
Swap is used to switch between the active call and the call on hold.
Transfer is used to connect an incoming call or a call on hold with an active
call and to disconnect yourself from both calls.
Send touch tones is used to send DTMF tone sequences, for example, passwords
or bank account numbers:
1 Key in the digits with the 0–9 keys.
Each keystroke generates a DTMF tone, which is transmitted while the call
is active. Press the * key repeatedly to produce *, p (inserts a pause of
approximately 2 seconds before or between DTMF characters), and w (if
you use this character, the remaining sequence is not sent until you press
the Send key again during the call). Press the # key to produce #.
2 To send the tone, press OK.
28 Copyright © 2005 Nokia