Monitor Specifications - Dell C7016H User Manual

5 DisplayPort connector
6 HDMI (MHL) connector Connect your computer with HDMI cable.
7 USB Down Stream Port
(Power Charging Port)
8 USB Down Stream Port Connect your USB devices.
9 USB upstream port
Bottom View
1 Speakers

Monitor Specifications

The following sections give you information about the various power management
modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA's DPM compliance display card or software installed in your PC, the
monitor automatically reduces its power consumption when not in use. This is referred
to as Power Save Mode. If the computer detects input from keyboard, mouse, or other
input devices, the monitor automatically resumes functioning. The following table
shows the power consumption and signaling of this automatic power-saving feature:
VESA Modes
Normal operation Active
Active-off mode
Switch off
Energy Star
On Mode
12 About Your Monitor
Connect your computer with DP cable.
Connect your MHL devices with MHL cable.
Connect your USB devices.
This USB port supports BC 1.2 compliance
charging devices, at 1.5A (power capability 2A
max) for fast charging.
Connect the USB cable that came with your
monitor to the computer. Once this cable is
connected, you can use the USB connectors on
the monitor.
Horizontal Vertical
Sync Sync
Active
Inactive Inactive Blank
- -
Power Consumption
114 W***
Power
Video
Indicator
Active White
Glowing
white
Off
Power Consumption
220 W (Maximum)**
142 W (Typical)
Less than 0.4 W
Less than 0.3 W *