Using The Kensington Lock; Installing On The Wall - LG 34UC97 Owner's Manual

Using the Kensington lock

The connector for the Kensington security system
is located at the bottom of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at http://www.kensington.com.
Connect the monitor to a table using the Kensing-
ton security system cable.
noTe
The Kensington security system is optional.
y
You can obtain optional accessories from most
electronics stores.
asseMblInG anD PRePaRInG

Installing on the Wall

Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
1 If you use screws longer than the standard
length, it may damage the inside of the
product.
2 A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
Wall Mount (a x b)
stand screw
Required screws
Wall Mount Plate
(optional)
11
10 cm
10 cm
10 cm
100 x 100
M4 x L10
4
RW120