Specifications - Pioneer DEH-3300RX1N Service Manual

DEH-3300R,3330R

8.2 SPECIFICATIONS

General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
(mounting size) ...... 178 (W) × 50 (H) × 157 (D) mm
(front face) .............. 188 (W) × 58 (H) × 19 (D) mm
Weight ...................................................................... 1.5 kg
Backup current ............................................................5mA
Amplifier
Maximum power output ...................................... 50 W × 4
50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)
Continuous power output .................................... 27 W × 4
Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output level/output impedance
.................................................................. 2.2 V/1 kΩ
Equalizer (3-Band Parametric Equalizer)
(Low) .......................... Frequency: 40/80/100/160 Hz
(Mid) .......................... Frequency: 200/500/1k/2k Hz
(High) ................ Frequency: 3.15k/8k/10k/12.5k Hz
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
Tone controls
(Bass) .......................... Frequency: 40/63/100/160 Hz
(Treble) .................. Frequency: 2.5k/4k/6.3k/10k Hz
Subwoofer output
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –12 dB/oct.
Level .............................................................. ±12 dB
CD player
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Frequency characteristics .............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 94 dB (1 kHz) (IEC-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity........................................................ 9 dBf
(DIN45324, +B = 14.4 V) 50 dB quieting sensitivity ........................................ 15 dBf
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Q Factor: 0.35/0.59/0.95/1.15 MW tuner
(+6 dB when boosted)
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Level: ±12 dB Usable sensitivity .............................. 18 µV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
LW tuner
Level: ±12 dB
Frequency range ........................................ 153 – 281 kHz
Usable sensitivity .............................. 30 µV (S/N: 20 dB)
Q Factor: 0.35/0.59/0.95/1.15
Selectivity .................................................. 50 dB (±9 kHz)
(+6 dB when boosted)
Level: ±12 dB
(volume: –30 dB)
Level: ±12 dB
Level: ±12 dB
Note:
• Specifications and the design are subject to possi-
Number of quantization bits: 16; linear
(0.8 µV/75 Ω, mono, S/N: 30 dB)
(1.7 µV/75 Ω, mono)
ble modification without notice due to improve-
ments.