Assign A Voice Tag To A Command; Activate A Voice Command - Nokia 6256i User Manual

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select
2. Select the phone function you wish to tag (Profiles,
Infrared, Voice recorder
3. If necessary, scroll to an option associated with that function, and press Select.
4. Select Options
5. Press Start, and speak the voice tag clearly into the microphone.
Note: Do not press
The phone replays and then saves the recorded tag. The
commands which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Press and hold the Right soft key.
2. When Please speak now
the microphone.
When the phone finds the voice tag,
recognized voice tag through the earpiece. The function you requested is
activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Select Playback
• Select Change
• Select Delete to erase the voice command tag.
Voice recorder
This feature allows you to record pieces of speech or sound with your phone and
listen to them later. The total available time is 30 seconds if no memos have been
stored. The maximum length of a recording depends on how much memory
remains available.
Menu
or Call log).
> Add.
Quit unless you want to cancel the recording.
appears, pronounce the voice tag clearly into
Found:
to listen to the voice command tag.
to change the voice command.
> Settings > Voice commands.
Voice
appears, and the phone plays the
70
mailbox, Radio,
icon appears next to
Copyright © 2005 Nokia