TABLE OF CONTENT FOR YOUR SAFETY ��������������������������������������������������������������������������������������������������������������3 PRECAUTIONS �������������������������������������������������������������������������������������������������������������������3 SPECIAL NOTES ON LCD MONITORS �����������������������������������������������������������������������4 BEFORE YOU OPERATE THE MONITOR ����������������������������������������������������������������������5 FEATURES ����������������������������������������������������������������������������������������������������������������������������5 PACKING LIST ���������������������������������������������������������������������������������������������������������������������5 INSTALLATION INSTRUCTIONS ����������������������������������������������������������������������������������6 CONTROLS AND CONNECTORS �������������������������������������������������������������������������������8 ADJUSTING THE VIEWING ANGLE ������������������������������������������������������������������������������9 OPERATING INSTRUCTIONS ��������������������������������������������������������������������������������������� 10 GENERAL INSTRUCTIONS ������������������������������������������������������������������������������������������...
FOR YOUR SAFETY Before operating the monitor, please read this manual thoroughly� This manual should be retained for future reference� WARNING: To prevent fire or shock hazard, do not expose the monitor to rain or moisture� Dangerously high voltages are present inside the monitor� Do not open the cabinet� Refer servicing to qualified personnel only�...
• Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards� Please refer all servicing to qualified service personnel� • To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min�...
BEFORE YOU OPERATE THE MONITOR FEATURES • 546�1mm (21�5’’) TFT Color LCD Monitor • Crisp, Clear Display for Windows 7, Windows 8, Windows 8�1 and Windows 10 • Recommend Resolutions: 1920 x 1080@60Hz • Ergonomic Design • Space Saving, Compact Case Design PACKING LIST The product package should include the following items: 1�...
Page 7
POWER CORD Power Source: 1� Please ensure you are using the correct power cord in your area� 2� This LCD monitor allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required�) 3� Connect the AC-power cord into your LCD monitor’s power input socket� The AC- power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor�...
CONTROLS AND CONNECTORS SIGNAL CABLE • Connecting the Signal Cable: Connect the 15-pin VGA cable to the back of the monitor and the computer’s VGA port� • Connecting the Power Cord: Connect the AC-power cord to the LCD monitor’s AC input socket and the wall outlet� • Connecting the DVI Cable: Connect the 24-pin DVI cable (not supplied) to the back of the monitor and the computer’s DVI port�...
ADJUSTING THE VIEWING ANGLE • For optimal viewing, it is recommended to look at the full face of the monitor and then adjust the monitor’s angle to your own preference� • Hold the stand so you do not topple the monitor when you adjust the monitor’s angle�...
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off� The other control buttons are located on the side of the monitor� By changing these settings, the picture can be adjusted to your personal preferences� • The power cord should be connected�...
FRONT PANEL CONTROL • Power Button: Press to switch the monitor on or off� • Power Indicator: Blue — Power On mode� Orange — Standby mode� LED off — Off mode� • MENU / ENTER: Activate OSD menu or function adjust confirm or Exit OSD menu when in Brightness/Contrast OSD status�...
HOW TO ADJUST A SETTING 1� Press the MENU-button to display the OSD menu� 2� Press + or - to navigate through the menu items� Once the desired item is highlighted, press the MENU-button to enter� Press + or - again to navigate through the sub-menu� Once the desired item is highlighted, press MENU-button to activate it�...
ADJUSTING THE PICTURE The descriptions for function control: Main Menu Main Menu Sub Menu Item Sub Menu Description Item Icon Contrast* Contrast adjustment Brightness* Brightness adjustment Standard Standard Mode Text Text Mode Luminance Internet Internet Mode Game Game Mode Movie Movie Mode Sports Sports Mode...
Main Menu Main Menu Sub Menu Item Sub Menu Description Item Icon Select input source VGA and Input Select VGA/DVI Turn ON/OFF DDC/CI DDC/CI Support Extra Reset yes or no Reset the menu to default� Show the information of the Information main image source�...
TROUBLESHOOTING Problem & Question Possible Solution • Check if the Power Switch is in the ON position� Power LED is not on • Power Cord should be connected� • Check if the PC system is Plug & Play compatible� No Plug & Play • Check if the Video Card is Plug &...
ERROR MESSAGE AND POSSIBLE SOLUTION NO SIGNAL 1� Check that the signal-cable is properly connected� If the connector is loose, tighten the connector’s screws� 2� Check the signal-cable’s connection pins for damage� INPUT NOT SUPPORTED Your computer has been set to unsuitable display mode� Set the computer to display mode given in the table on page 18�...
APPENDIX SPECIFICATIONS Driving system 21�5” TFT Color LCD Size 546�1 mm diagonal Pixel Pitch 0�2482 mm(H)×0�2482 mm(V) LCD Panel Response Time 5ms (typ�) (trise + tfall) Luminance of White 250 cd/m (typ�) at Center R, G, B Analog Interface Video Digital Input Separate Sync�...