Suspension Performance Tips - Polaris 550 Indy 144 Owner's Manual

Rear Suspension Adjustments

Suspension Performance Tips

• Rider weight usually determines the position at which the spring
preload should be set. However, this may vary with riding style. With
a little experimentation, each rider can find a preferred setup. These
adjustments are easy to make, involve very little time or effort, and
greatly affect the ride. Always perform shock spring preload
adjustments with the weight of the vehicle removed from the shock
and with the shock at full extension.
• In deep snow, a new rail slide will offer improved performance over
worn rail slide. It can also improve top speed.
• When riding on ice or hard-packed snow, adding a set of bogie wheels
to the rail may enhance the machine's performance. Bogie wheel kits
are available from your dealer.
• POLARIS offers track kits for improved flotation in deep snow. See
your dealer for assistance.
Tip: Keep the suspension pivot points lubricated. This will reduce moisture and
rust build-up and ensure proper function of the suspension components.
Grease rear suspension pivots before adjusting the rear suspension. Refer
to the Pre-Ride Suspension Inspection on page 43.
Track Tension
Track adjustment is critical for proper handling. Always maintain
correct tension and alignment. Refer to the track tension maintenance
section beginning on page 86.
THE PERFECT FIT
37