Packet Data; Packet Data Connection; Packet Data Settings - Nokia 6233 User Manual

Packet data

WCDMA and general packet radio service (GPRS) are network services that allow mobile phones to send and
receive data over an Internet protocol protocol (IP)based network. WCDMA and GPRS are data bearers that
enable wireless access to data networks such as the Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability
of EGPRS and data transfer speed, contact your network operator or service provider.
The applications that may use WCDMA or (E)GPRS are MMS, video streaming, browsing sessions, email, remote
SyncML, Java application downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS if this is available in the
network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select
GPRS or GSM data (circuit switched data, CSD).

Packet data connection

Select Menu > Settings > Connectivity > Packet data > Packet data connection, and from the following
options:
Always online to set the phone to automatically register to a packet data network when you switch on the
phone. or indicates that the packet data service is available.
If you receive a call or a text message, or make a call during a packet data connection, or indicates that
the packet data connection is suspended (on hold).
When needed to register and establish a packet data connection when an application using packet data needs
it, and to close the connection when you end the application.

Packet data settings

You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable connection to a
compatible PC and use the phone as a modem to enable packet data connectivity from the PC.
Copyright © 2006 Nokia. All rights reserved. 67