Ariston A/23 MFFI User Manual page 12

Erocombi
Table of Contents

Advertisement

The colon now blinks once a second.
AM/PM TIME DISPLAY
If you press the "+/-h" and "h" keys as the same time, the time display swit-
ches into the AM/PM mode.
Notes: If you keep the "h" and "m" keys pressed down for more than 2
seconds, the display will enter fast forward scroll mode.
ENTERING THE SWITCHING TIMES
If your entry is incomplete, the segments not yet
selected will blink in the display.
You have 20 memory locations available. Each swit-
ching time takes up one memory location.
Keep pressing the "Prog" key until a free memory
location is shown in the display "-- : --".
Program ON or OFF with the "
"
" = ON - "
" = OFF.
Enter the hour using "h"; enter the minutes using "m".
If a switching command is to be carried out every day (1 2 3 4 5 6 7) then
store using the "
" key, otherwise select the days it is to be carried out
on by using the "Day" key.
When the day selection is left blank, the programmed switching instruction
12
Supplied By www.heating spares.co Tel. 0161 620 6677
operates at the same time every day.
1 2 3 4 5 6 7
1 2 3 4 5 6
1 2 3 4 5
1 2 3 4 5
1
.....
7
Store using the "
programming. The time switch enters the automatic operating mode and
displays the current time of day. Begin any further entry of a switching time
" key:
with the "Prog" key.
If necessary, once you have finished programming, and have returned to
the current time display, by pressing the " " button, the timer will not auto-
matically switch to the current programmed status until the next timed set-
ting. You can put the timer into the correct mode with the "
Monday ..... Sunday
Monday ..... Saturday
Monday ..... Friday
6 7
Saturday ..... Sunday
Monday
(selection of single days)
Sunday
" key or push "Prog" key if you are going to continue
" key.
B022

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents