Using The Dell Optiplex Resourcecd - Dell OptiPlex GX50 Setup And Quick Reference Manual

Using the Dell OptiPlex ResourceCD

To use the Dell OptiPlex ResourceCD while you are running the Microsoft
®
Windows operating system, perform the following steps.
NOTE: To access device drivers and user documentation, you must use the
ResourceCD while you are running Windows.
Turn on the computer and allow it to boot to the Windows desktop.
1
Insert the Dell OptiPlex ResourceCD into the CD drive.
2
If you are using the Dell OptiPlex ResourceCD for the first time on this
computer, the ResourceCD Installation window opens to inform you
that the ResourceCD is about to begin installation.
Click OK to continue.
3
To complete the installation, respond to the prompts offered by the
installation program.
Click Next at the Welcome Dell System Owner screen.
4
Choose the appropriate System Model, Operating System, Device
5
Type, and Topic.
Drivers for Your Computer
To display a list of device drivers for your computer, perform the following
steps:
Click My Drivers in the Topic pull-down menu.
1
The ResourceCD scans your computer's hardware and operating
system, and then a list of device drivers for your system configuration
is displayed on the screen.
Click the appropriate driver and follow the instructions to download
2
the driver to your computer.
To view all available drivers for your computer, click Drivers from the Topic
pull-down menu.
®
Setup and Quick Re ference Guide
21