Sd Card Installation - D-Link DCS-7413 Quick Install Manual

1
Loosen the two screws and lift off the
adjustable sun shield.
2 Remove the base of the camera by holding
the camera firmly and rotating the base in
a counter-clockwise direction.
3 Insert your SD card into the camera with
the gold contacts oriented towards the
base of the camera. To eject the SD card,
push the SD card into the slot.
4
Replace the base of the camera by holding
the camera firmly and rotating the base in a
clockwise direction ensuring a tight fit.
Note: Ensure that the weatherproof seals are
secured firmly in place. Attach the sun shield
and tighten the two screws.
Note: If you fully extend the top shield, it may be visible in the camera view in the top left and right corners
of your video. It is recommended that you always check your camera's video whenever you reposition the
camera or adjust the weather shield to ensure that your camera has the best possible view.
4

SD Card Installation

D-Link DCS-7413 Quick Install Guide