Nokia 6136 User Manual page 62

S e t t i n g s
Wi-Fi call settings
Configuration — Select an UMA configuration from the list.
Account — Select an UMA account from the list.
Connection failure
You may not be able to connect to the network at times. Try connecting to the
network later, as this may be only a temporary error. If the connection still fails,
contact your service provider.
Login failure
If you attempt to login to a network without a UMA subscription,
service provider is displayed.
Infrared
You can set up the phone to send and receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data to or from a
compatible phone or data device (for example, a computer) through the IR port of
your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone, select
Infrared.
To deactivate the IR connection, select
Infrared. When the phone displays
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
62
Menu > Settings
Menu > Settings
Deactivate infrared?, select Yes.
Contact your
> Connectivity
> Connectivity >
>