Nokia 6019i User Manual page 62

TTY/TDD
Note: This feature is carrier dependent.
In addition to the Nokia phone, you will need the following for TTY/TDD communication:
• A TTY/TDD device that is cellular ready or cellular compatible.
• A cable for connecting the TTY/TDD to your Nokia phone, usually supplied by the
manufacturer of the TTY/TDD device.
Set up the TTY/TDD profile
You can connect your phone directly to the TTY/TDD device. In order for your phone to
recognize the TTY/TDD, you will need to set up the TTY/TDD profile.
Important: Some manufacturers of TTY/TDD devices suggest that the phone be
at least 18 inches from the TTY/TDD device. When connecting to any other
device, read its user guide or contact its manufacturer for detailed instructions
and safety information.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the 2.5-mm headset jack on the side of your
phone.
3. At the start screen, select
TTY > Yes.
TTY/TDD calls
• Check with the manufacturer of the TTY/TDD device for a connecting cable that is
compatible with the Nokia phone.
• TTY/TDD communications depend on network availability. Check with your service
provider for availability and description of services.
Make a call
1. At the start screen, enter the number, and press the Talk key.
2. When the receiving party answers, begin typing your conversation on the TTY/TDD.
3. Press the End key to end the call.
Menu > Settings > Enhancement settings
61
Settings (Menu 4)
> TTY/TDD > Use
Copyright © Nokia 2004