TP-Link RE200 Quick Installation Manual page 2

Method TWO Quick Setup using the WPS (RE) Button
WPS is an easier way to extend your host network. You are recommended to use this method if your host router has a WPS button.
The button might look like one of these:
1
Power on
Plug the extender into a power
outlet near your router.
Wait until the and LEDs
light up.
3
Relocate
1 Plug in the extender halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your existing host
network.
2 Wait for the extender to reconnect and the 2.4G/5G LED should turn green. If
not, relocate it closer to the router to achieve better signal quality.
Enjoy!
Both extended networks share the
Entertainment Adapter
The extender can be used as a wireless adapter to connect any Ethernet-only device
such as a Blu-ray player, game console, DVR or smart TV to your Wi-Fi network.
First, connect the extender to your router referring to Method ONE or Method TWO.
Then connect your Ethernet-only device to the extender via an Ethernet cable.
Frequently Asked Questions (FAQ)
Q1. How to reset the extender?
A1. With the extender powered on, press the RESET button with a pin for 1 second. Wait
for 2 seconds until all the LEDs flash once.
Log into the management page via your web browser, go to System Tools >
A2.
Factory Defaults and click Restore.
. Otherwise, please refer to Method ONE.
2
Connect
1
Press the WPS button on your router, and then press the
2
If you are connecting the extender to a dual-band router but only 2.4G or 5G LED is on, repeat Step 1 to
connect the other band.
For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Some ISP gateways disable the WPS function by default. If the WPS connection fails, please refer to Method ONE.
same network names (SSIDs)
button on your extender.
Host Network
Router Ideal Extender Placement
passwords
and as those of your host networks.
Ethernet connection
Smart TV Game Console Desktop
Q2. What should I do if I can not access the web management page of the extender?
A1. If your computer is wirelessly connected, make sure that you have connected to the
extender's SSID.
If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
A2. Make sure your computer is set to obtain an IP address and DNS server address
automatically.
A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and
press Enter.
The LED should go from
ashing to solid, indicating that
WPS connection was successful,
and then it will go o in 2 minutes.
Extended Network
Clients
Router
©2016 TP-LINK