Reflecta x6 User Manual page 18

To get the best Digitize image wait for the image
display on the LCD screen to adjust the brightness until
it becomes stable. It normally takes 3~4 seconds,
depending on the brightness of your film.
Wait for the "Wait" cursor to disappear, then you may
take your next picture.
Note: For power saving the copier will automatically turns
to sleep condition if you are not using it for more
than 3 minutes. You may wake up the copier by
pressing the screen.
If the copier is not using for more than 6 minutes it
will turn off automatically.
6. Touch the Star Icon to adjust the image quality.
Low
Standard
Best
-17-
EN