Edit Contacts List Entries; Dialing Codes - Nokia 6015i User Manual

6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 41 Tuesday, January 25, 2005 10:05 AM
Delete speed dialing numbers
1. At the start screen, select Contacts > Speed dials.
2. Scroll to the speed dialing location you wish to delete, and select
Options > Delete > OK to delete the key assignment.

Dialing codes

Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Press * repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
The following dialing codes are available:
* —Bypasses a set of instructions.
+—International access code is replaced by a +.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press Call before sending the numbers or codes
that follow.
Set up phone number with dialing codes
1. Enter your phone number, including the area code.
2. Refer to dialing codes and enter any codes as necessary.
For example, if you pause for 5 seconds after connecting to voice
mail, enter p twice after the voice mailbox number, for example,
2145551212pp.
3. Enter any remaining pauses or other information that allows you to
make your call, and select OK.
4. Enter a name at the prompt (such as Voice Mail), and select OK.
I

Edit contacts list entries

1. At the start screen, scroll down to display the contents of your
contacts list.
2. Scroll to the entry you would like to edit, and select Details.
C o n t a c t s
41