Sony KV-32XBR200 Service Manual page 29

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
BACKGROUND POSITION ADJUSTMENT
(BGHP, BGVP)
NOTE: Prior to this adjustment, the P&P ACQUISITION
ADJUSTMENT must be performed (see previous page).
1. Input a monoscope signal.
2. Set VIDEO mode = STANDARD.
3. Freeze a main picture.
4. Set to Service Mode and select BGHP (pp), BGVP (pp) with
and .
5. Adjust with and for the best center.
6. Write into the memory by pressing
FREEZED
•NEED TO ADJUST AFTER P&P (MAIN)
ACQUISITION ADJUST
A B
A–B = ±0.2 sg
C–D = ±0.2 sg
P&P WHITE BALANCE ADJUSTMENT
(MUPE, MVPE, IUPE, IVPE)
1. Input a 40 IRE white signal.
2. Set to VIDEO mode = STANDARD.
3. Set to P&P mode.
4. Set to Service Mode and select MUPE MVPE (main
window), IUPE IVPE (sub window) with
and
5. Adjust with for white balance.
6. Write into the memory by pressing
NEED TO ADJUST AFTER
MAIN PICTURE (NOT P&P)
W/B ADJUST
SUB WINDOW MAIN WINDOW
*9300 degrees K +8 MPCD
then .
C
D
and
.
then .
P&P OSD ADJUSTMENT (PDPS)
1. Input a monoscope signal.
2. Set to channel INDEX mode.
3. Adjust so right side edge of P&P OSD is 1 ~ 2 characters
from border.
ADJUST......PDPS (OP)
If necessary, adjust PDP 0
PDP 1
PDP 2
4. Push the P&P off.
5. Push the return key for favorite channel.
6. Confirm 1 ~ 2 characters distance.
7. Write the memory by pressing
1⁄2CHAR 1⁄2CHAR 1⁄2CHAR 1⁄2CHAR
2 3 4
2
1⁄2CHAR 1⁄2CHAR 1⁄2CHAR
2
3
: CRT Usable Area.
OSD POSITION ADJUSTMENT (DISP)
1. Input a color bar signal.
2. Set to Service adjustment Mode.
and
3. Select DISP with
and
4. Adjust with for the bar center.
5. Write into the memory by pressing
SERVICE VP AFC 0
1000 0000
|||||||||||||||------------
— 29 —
KV-32XBR200/KV-36XBR200
then .
5
4
.
then .