Using Your New Tv - Sony KV-32XBR200 Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
Using Special Sony Features
Using the CONTROL S feature
CONTROL S allows you to control your TV
and other Sony equipment with one remote
control.
To control your other Sony equipment with
your TV's remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the TV with the
CONTROL S cable.
To control other Sony equipment with your
TV's remote control, see "S-Link Connections"
on page 12.
Basic Set Up
Inserting Batteries Using the Remote Control
Joystick
Insert two size AA (R6) batteries (supplied) by
matching the + and – on the batteries to the
diagram inside the battery compartment.
OFF
TV/DBS
VOL
MENU
RESET
VTR 1 2 3 DVD/MDP
CODE SET
Notes
• Remove the batteries to avoid damage
The supplied remote control has a joystick
from possible battery leakage whenever
which allows for movement of the on-screen
you anticipate that the remote control will
selector. Pressing up, down, left, or right on
not be used for an extended period.
the joystick will cause the selector to move in
• Handle the remote control with care.
the corresponding direction. Pressing down
Avoid dropping it, getting it wet, or
on the center of the joystick (
placing it in direct sunlight, near a heater,
the item.
or where the humidity is high.
• Your remote control can be programmed to
Adjustment Bars
operate most video equipment.
(see "Operating Video Equipment" on
When menu items present an adjustment bar
page 31)
( or
right on the joystick to adjust the setting.
Disconnect all power sources before making any connections.
(Rear of TV)
VIDEO IN
1 3 4
Y
S VIDEO
OUT
P
B TV MONITOR AUDIO
(VAR/FIX)
VIDEO P VIDEO
R
L L L
(MONO) (MONO)
AUDIO AUDIO AUDIO
R R R
S-LINK
CONTROL S
OUT IN
CONTROL S
IN
OUT
On Screen Help/Instructions
Several menu windows will provide prompts
and instructions to assist you in navigating
through the different functions.
When the instructions are presented, use them to
GUIDE
MTS
supplement the instructions in this manual.
CH
Select
RM -Y144
) will select
), press up, down, left, or
Connecting and Installing the TV (continued)
Connecting S-Link to your VCR
S-Link will automatically power on the TV and
switch to the correct video input when a tape is
inserted in the VCR or when you begin to play
a tape.
1 Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
2 Using an S-LINK connector (mono mini
plug), connect S-LINK/CONTROL S-IN on
your VCR to S-LINK on your TV.
Connecting S-Link to your DBS
S-Link will automatically power on the TV and
switch to the correct video input when you
power on the DBS.
1 Using A/V connectors, connect AUDIO and
VIDEO OUT on your DBS to AUDIO and
VIDEO IN on your TV.
2 Using an S-LINK connector (mono mini
plug), connect S-LINK/CONTROL S-IN on
your DBS to S-LINK on your TV.
Note
• If you have labeled one of your video inputs
as SKIP (see "VIDEO LABEL" on page 27)
and then connect video equipment to this
input using S-Link, the S-Link feature will
override the SKIP function.
11 12

Using your New TV

Setting Up the TV
Automatically
The Easy Setup Guide feature allows you to
set the on-screen language and set all
receivable channels in one step.
The AUTO PROGRAM function of the Easy
Setup Guide feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the TV manually. (see "Using
the SET UP menu" on page 26)
Tips z
• Perform this function during the day, with the
antenna and/or cable properly connected, to ensure
that all available channels will be broadcasting and
receivable.
• After using Easy Setup Guide you will still have the
option of adjusting any of the system settings, like
erasing channels, through the SET UP menu. (see
"CHANNEL SET UP" on page 26)
13 14
Disconnect all power sources before making any connections.
VMC-810S/820S (not supplied)
1
AUDIO-R (red)
AUDIO-L (white)
VCR
VIDEO (yellow) (Rear of TV)
OUT VIDEO IN
1
IN AUDIO R AUDIO L VIDEO S VIDEO
LINE S-LINK
OUT S VIDEO
VIDEO
L
(MONO)
AUDIO
2
R
RK-G69HG (not supplied)
The S-Link connector must be in the same
VIDEO-IN jacks as the A/V cables on your TV.
DBS (Rear of TV)
SATELLITE IN
VHF/UHF
AUDIO R AUDIO L VIDEO S VIDEO IN
S-LINK LINE
OUT
S VIDEO
OUT
AUDIO-R (red)
1
VIDEO
AUDIO-L (white)
L
VIDEO (yellow) (MONO)
AUDIO
R
VMC-810S/820S (not supplied)
2
RK-G69HG (not supplied)
3
Using the buttons on the top of the TV: Press VOLUME – to continue.
SET UP TV/VIDEO – VOLUME + – CHANNEL + POWER – VOLUME +
1
Press POWER to turn on the TV.
AUTO PROGRAM appears and the TV starts
The Easy Setup Guide screen appears.
scanning and presetting channels
automatically. When all the receivable channels
ENGLISH: [ CH + ]
are stored, the lowest numbered channel is
ESPAÑOL: [ CH – ]
FRANÇAIS: [ VOL + ]
displayed. If the TV receives cable TV channels,
AUTO SET UP: [ VOL – ]
DEMO: [ TV / VIDEO ]
CABLE is set to ON automatically.
First please connect
POWER
cable/antenna
To perform AUTO SET UP again
Press [SET UP] to exit.
Press the SET UP button on the TV and follow
2 steps 2–3.
Press CHANNEL + to select ENGLISH,
CHANNEL – to select ESPAÑOL or
Notes
VOLUME + to select FRANÇAIS. • Before you perform Easy Setup Guide again,
make sure that the input from ANT (not
The screen will change to reflect your
AUX) is selected by pressing ANT until
choice.
"AUX" does not appear next to the channel
number.
ENGLISH: [ CH + ]
ESPAÑOL: [ CH – ] • When you perform AUTO PROGRAM, your
FRANÇAIS: [ VOL + ]
AUTO AJUSTES: [ VOL – ] CHANNEL FIX, TIMER, and CHANNEL
DEMO: [ TV / VIDEO ]
+ – +
VOLUME CHANNEL BLOCK settings will be erased.
Primero conecte el
cable/antena
Oprima [SET UP] • To reset your TV to factory settings, turn the
para salir.
TV on. Then, while pressing the RESET
button on your remote control, press the
For a DEMO of functions and menus,
POWER key on your TV. The TV will turn
press TV/VIDEO.
itself off, then back on.
3 4
Y
OUT
P
B
TV MONITOR AUDIO
(VAR/FIX)
VIDEO
P R
L L
(MONO)
AUDIO AUDIO
R R
S-LINK
CONTROL S
IN
OUT
VIDEO IN
1 3 4
Y
OUT
P B
TV MONITOR AUDIO
(VAR/FIX)
P VIDEO
R
L L
(MONO)
AUDIO
AUDIO
R
R
S-LINK
CONTROL S
OUT IN
AUTO PROGRAM