Table of Contents
Advertisement
70DS-01FP
Power Input .........................220V-240 Volts AC 50Hz
Power Consumption ............................................99W
Audio Power Output Rating.................4.5 (M.P.O.)x2
Speaker...................................................6cm X 13cm
Voice Coil Impedance........................7ohms x 2 units
Convergence.......................Self Converging System
Focus..................................Bi-Potencial Electrostatic
Sweep Deflection.........................................Magnetic
The chassis in this receiver is partially hot. Use an isolation transformer between the line
cord plug and power receptable, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer
servicing to qualified sercice personnel.
ELECTRICAL SPECIFICATIONS
WARNING
2
Intermediate Frecuencies
•Intermediate Frecuencies
L'(VHF-L).............................................33.9MHz
L(VHF-H, UHF)B/G.............................38.9MHz
•Sound IF Carrier Frequencies
L'(VHF-L).............................................40.4MHz
L(VHF-H, UHF)............................33.5/32.4MHz
B/G..............................33.05/33.158/34.47MHz
•Colour Sub-Carrier Frequencies
SECAM L'..........................38.15/38.30625MHz
SECAM L, B/G..................34.65/34.49375MHz
PAL B/G.............................................34.47MHz
Aerial Input Impedance
VHF/UHF...........................75 ohm Unbalanced
Tuning Ranges
L/L'.........................55.75MHz thru 855.25 MHz
B/G........................48.25MHz thru 855.25 MHz
Specifictions are subject to change without
prior notice.
CATV Special Channels
Advertisement
Table of Contents
